1-10
Setting up the Printer with Your Computer
R4C6020
Rev. 1
A5 size SETUP.FM
7/12/01 Pass 3
L
Proof Sign-off:
DAI A. Kobayashi K. Araki
K. Nishi
DAI K. Ramsey
5. Windows 95 and NT users should proceed to step 6.
For Windows 98 users, follow the on-screen instructions to
turn on your printer. The printer port configuration starts
automatically.
For printers connected via USB cable, the USB device driver
installation starts automatically at this point.
6. When a message appears informing you that installation is
complete, click OK.
Note:
If an error message appears, either the printer driver or the EPSON
USB printer device driver is not installed correctly. See
“Troubleshooting” in the Online Guide.
For information on opening and using the printer software, see
“Printing from Your PC” on page 2-14. If you use your printer on
a network, see “Setting up Your Printer on a Network” on page
1-14.
Ensuring that the USB driver is installed correctly in Windows
(for Windows 98 and Me only)
After the printer software installation is complete, confirm that
the USB driver is installed correctly.
1. Click the Start button, point to Settings, and click Printers.
Make sure that the icon for your printer appears in the Printers
window.
To Next Page
Loading...
