2-6
Printing and Printer Management
R4C6020
Rev. 1
A5 size MANAG.FM
7/12/01 Pass 0
L
Proof Sign-off:
DAI A. Kobayashi K. Araki
K. Nishi
DAI K. Ramsey
Loading the roll paper
To load roll paper, follow the steps below.
1. Make sure that the printer is on.
2. Press the Paper Source button repeatedly until the Roll Auto
Cut light or Roll Cutter Off light comes on.
c
Caution:
Depending on the kind of paper used, automatic cutting may
not be possible.
3. Make sure the Operate light and Pause light are not flashing,
then push the paper set lever all the way down. LOAD PAPER
appears on the LCD panel.
c
Caution:
Do not move the paper set lever while the Operate light or
Pause light is flashing. Doing so may damage the printer.
To Next Page
Loading...
