2-10
Printing and Printer Management
R4C6020
Rev. 1
A5 size MANAG.FM
7/12/01 Pass 0
L
Proof Sign-off:
DAI A. Kobayashi K. Araki
K. Nishi
DAI K. Ramsey
Now you are ready to print on the roll paper. Make the printer
driver settings, then send a print job. See “Printing from Your PC”
on page 2-14 or “Printing from Your Macintosh” on page 2-20.
Loading Cut Sheet Media
To load a cut sheet longer than 483 mm (long edge of Super A3/B
size), see the next section. To load paper with a length of 483 mm
or shorter, see “Loading cut sheet with a length of 483 mm (long
edge of Super A3/B) or shorter” on page 2-13.
If you are printing on thick paper (0.5 to 1.5 mm), see the Online
Guide.
Loading cut sheet media longer than 483 mm
(long edge of Super A3/B size)
To load cut sheet media longer than 483 mm, follow the steps
below.
c
Caution:
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
To Next Page
Loading...
