Epson Stylus Pro 7600 Product Information

EPSON Stylus Pro 7600 and 9600
7/02 EPSON Stylus Pro 7600 and 9600 - 2
-
Printer Specifications
Printing
Engine Reliability
roll paper cover
control
panel
front
cover
paper set lever
parallel interface connector
optional interface
shield plate
USB interface
connector
AC inlet
ink cartridge
compartment
paper set lever
Note:
The stand is optional for the Stylus Pro 7600.
paper guides
Printing method 7 color EPSON UltraChrome ink or
6 color EPSON Photographic Dye ink
UltraChrome model switchable between
three ink modes:
❏ Photo Black Mode (uses Photo Black
and Light Black cartridges)
❏ Matte Black Mode (uses Matte Black and
Light Black cartridges)
❏ Dual Matte Black Mode (uses two Matte
Black cartridges)
Nozzle
configuration
96 nozzles for each color: black 1, black 2,
cyan, magenta, yellow, light cyan, light
magenta
Resolution Maximum 2880 dpi × 1440 dpi
Print direction Bidirectional
Control code ESC/P
®
Raster Photographic Driver
Line spacing 1/6 inch (default), programmable in
1/1440-inch increments
Paper feed speed 200 ± 10 milliseconds per 1/6-inch line
RAM 32MB (Stylus Pro 7600)
64MB (Stylus Pro 9600)
Total print
volume
20,000 B0 images, 360 × 360 dpi
Print head life 28 billion dots per nozzle
Periodic
maintenance
Pump unit, head cleaner, and cap assembly
require replacement approximately every 2
years based on 25% duty cycle
Cutter blade life Approximately 2000 B0+ sheets (EPSON
media up to 4.33 mil thick); approximately
1000 B0+ film sheets

Epson Stylus Pro 7600 Specifications