Epson Stylus Pro 7710 - Page 165

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
TROUBLE SHOOTING Remedies for Print Quality Troubles 165
Confidential
Note "*": Does not occur if used within the specified duty in the specified usage environment (may; however, occur if too much duty is applied).
The outline becomes
translucent.*
The outline of the white ink in
color print becomes
translucent.
• If there is more water than the capacity of absorption of the CPF,
excess water remains in the white ink and the ink becomes
translucent.
• If the color ink is printed on the white ink, the moisturizer (glycerin)
in the color ink spreads from the color print area to the white ink
surroundings.
• This symptom occurs when the CPF's absorbability becomes low
due to a low temperature or high duty printing.
• When printing with duty even higher than this symptom, oozing or
uneven sedimentation occurs.
• Print in the guaranteed usage environment (See P.152).
• Lower the white ink duty on the RIP setup or on the
image data.
Color print becomes
transparent and mottled.
In the Surface Print mode,
color print becomes
transparent or partially
transparent and mottled. Does
not occur in the Reverse Print
mode.
Symptom Occurrence condition Cause
Remedy/Points to be checked
Color ink
Translucencewhite ink
CPF