Epson Stylus Pro 7710 - Page 178

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Overview 178
Confidential
Note *: The printhead for each model is installed in the manufacturing process; however, only the printhead for Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 is established as a service
part. Therefore, the printhead for Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 is also used for Epson Stylus Pro 7900/7910/9900/9910.
Printhead
The printhead is
used individually
adjusted for the
characteristics of
the product. (The
shape and
component are
the same; as the
part itself, but the
head rank ID
differs.)
Epson
Stylus Pro
7900/7910/
9900/9910/
WT7900/
WT7910/
7890/7908/
9890/9908
ASP Name
PRINT
HEAD
OK
NG: Print quality might be
degraded, but it is
difficult to distinguish
the wrong usage from
the printed result.
OK OK
Part Code F191010
Epson
Stylus Pro
7700/7710/
7700M/
7710M/
9700/9710
ASP Name
PRINT
HEAD
OK* OK OK* OK
Part Code F191010
Figure 4-2. Compatibility of the parts/components between models
Part name Description
Epson Stylus Pro 7900/
7910/9900/9910
Epson Stylus Pro 7700/
7710/7700M/7710M/9700/
9710
Epson Stylus Pro WT7900/
WT7910
Epson Stylus Pro 7890/
7908/9890/9908
Installation location
Installing part