Epson Stylus Pro 7710 - Page 200

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 200
Confidential
SPECTROPROOFER
AUTO TAKE-UP REEL
START
“4.4.8.1 Color Measurement
Device” (p325)
“4.4.8.2 Mounter” (p327)
“4.4.8.3 Right Cover” (p328)
“4.4.8.12 Mount Sensor”
(p338)
“4.4.8.6 Front Cover” (p331)
“4.4.8.18 Carriage Motor”
(p347)
“4.4.8.7 Main Board” (p332)
“4.4.8.10 CR HP Sensor”
(p336)
“4.4.8.4 Left Cover” (p329)
“4.4.8.16 Cooling Fan 2”
(p343)
“4.4.8.5 I/F Cover” (p330)
“4.4.8.3 Right Cover” (p328)
“4.4.8.13 LED” (p339)
“4.4.8.8 Power Supply Board”
(p334)
“4.4.8.11 Thermistor” (p337)
“4.4.8.9 Paper Pressing Plate
Sensor” (p335)
“4.4.8.4 Left Cover” (p329)
“4.4.8.15 Cooling Fan 1”
(p342)
“4.4.8.19 Paper Pressing Unit”
(p349)
“4.4.8.14 Paper Pressing
Encoder” (p340)
“4.4.8.17 Paper Pressing
Motor” (p346)
“4.4.8.3 Right Cover” (p328)
START
“4.4.7.1 Take-up Reel Cover”
(p313)
“4.4.8.2 Mounter” (p327)
“4.4.8.6 Front Cover” (p331)
“4.4.8.10 CR HP Sensor”
(p336)
“4.4.8.5 I/F Cover” (p330)
“4.4.8.4 Left Cover” (p329)“4.4.8.6 Front Cover” (p331)