Epson Stylus Pro 7710 - Page 216

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 216
Confidential
4.4.2.12 Spindle Cover L
1. Remove the IC Cover L and the IC Shaft Cover L. (p206)
2. Remove the Maintenance Tank L. (p208)
NOTE: There is no Maintenance Tank (L) mounted for the Epson Stylus Pro
7700/7710/7700M/7710M/7900/7910/WT7900/WT7910/7890/7908.
3. Remove the Left Cover. (p209)
4. Remove the three screws that secure the Spindle Cover L.
A) Black, Phillips, Bind machine screw M4x8: two pieces
B) Silver, Phillips, Bind S-tite with S.W & P.W. M4x8: one piece
5. Remove the Spindle Cover L.
Figure 4-30. Removing the Spindle Cover L
B
A
Spindle Cover L