Epson Stylus Pro 7710 - Page 261

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 261
Confidential
4.4.5.7 Suction Fan
1. Push down the handle of the cover and remove the cover.
2. Remove the five screws that secure the Front Cover (Lower), and remove the
Front Cover (Lower).
A) Silver, Phillips, Truss machine screw M4x6: five pieces
Figure 4-99. Removing the cover
Figure 4-100. Removing the Front Cover (Lower)
Handle
Cover
A
Front Cover (Lower)