Epson Stylus Pro 7710 - Page 304

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 304
Confidential
16. Remove the screws that secure the Ink Selector.
NOTE: The number of screws differs between Epson Stylus Pro 7900/7910/9900/
9910/WT7900/WT7910/7890/7908/9890/9908 and Epson Stylus Pro
7700/7710/7700M/7710M/9700/9710.
C) Silver, Phillips, Bind S-tite M3x8:
Epson Stylus Pro 7900/7910/9900/9910/WT7900/WT7910/7890/7908/9890/
9908
: two pieces
Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 : two pieces
D) Silver, Phillips, Pan screw with S.W & P.W. M3x8:
Epson Stylus Pro 7900/7910/9900/9910/WT7900/WT7910/7890/7908/9890/
9908
: five pieces
Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 : two pieces
E) Black, Phillips, Bind S-tite M3x12:
Epson Stylus Pro 7900/7910/9900/9910/WT7900/WT7910/7890/7908/9890/
9908
: one piece
Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 : one piece
Figure 4-160. Ink Selector fixing screws (Epson Stylus Pro 7900/7910/9900/9910/WT7900/
WT7910/7890/7908/9890/9908)
Figure 4-161. Ink Selector fixing screws (Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710)
C
D
Ink Selector
E
C
D
Ink Selector
E