Epson Stylus Pro 7710 - Page 433

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Tests 433
Confidential
 Fan Check
1. Select Fan check.
2. If the following screen appears, click on the [OK] button.
Figure 5-96. [Fan check] Screen
3. If the following screen appears, click on the [OK] button to start the Cooling
Fans.
Figure 5-97. [Fan check] Start Screen
4. Confirm that the air blows normally by inserting your hand from the bottom
of the mounter. The fans will operate for 30 seconds.
If the air does not blow, follow the instruction below.
Figure 5-98. Check point for Cooling
5. If the following screen appears, click on the [OK] button.
Figure 5-99. Confirmation Screen
Symptom Remedy
No air blows.
Check the connection of Cooling Fans.
Replace the Cooling Fan(s). (p. 342, p. 342)
Abnormal noise Check the Cooling Fan(s) for attachment of foreign material.