Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Tests 435
Confidential
MOUNTER + ILS TEST PROCEDURE
Preparation
1. Start the inspection program.
2. Install the Color Measurement Device, the
white calibration tile holder, and the
black backing.
3. Connect the Color Measurement Device to the printer with a USB cable.
4. Connect the printer to the computer with a USB cable.
5. Turn on the mounter.
6. Turn on the printer.
7. Wait until the printer becomes ready to print.
NOTE:
If an error related to the Color Measurement Device is
occurring, the message for it appears on the LCD of the
control panel.
8. Select MOUNTER + ILS TESTS from the inspection program.
Figure 5-102. [MOUNTER + ILS] Menu Screen
To Next Page
Loading...
