Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
MAINTENANCE Lubrication 455
Confidential
[Lubrication 5] [Lubrication 6]
Part Name Roll Cover Assy (full side)
Lubrication Point On the contact point of the Roll Cover Assy with the mounting plate
Lubricants G-45
Amount φ 2 x 3 mm x 6 points
Note
Apply the grease to the six points, and spread it evenly over the area (in
red) shown below.
Lubrication Point
Part Name Carriage Unit
Lubrication Point On the contact point of the PG Cam with the Shield plate
Lubricants G-71
Amount φ 2 x 3 mm (3 times each)
Note
Apply the grease of the amount above three times each on the left and
the right sides at the points. Be careful not to apply it out of the width of
the cam.
Lubrication Point Lubrication Point
To Next Page
Loading...
