Epson Stylus Pro 7890 - Adding the Network Port; Windows

Setting Up Your System for Network Printing 23
Adding the Network Port
After installing the printer software on your computer, you need to add the
network port. See the appropriate section below for your operating system.
Windows
1. Click Start or , click Control Panel, and then click View Devices and
Printers (Windows 7), Printer or Printers (Windows Vista), or Printers
and Faxes (Windows XP).
2. Right-click Epson Stylus Pro 7890 (or 9890) and select Printer
Properties or Properties.
3. Click the Ports tab, then click Add Port.
4. Select EpsonNet Print Port, then click the New Port button.