130
130 | Printing With Epson Drivers for Windows
3. Choose one of the following settings (if you select Color Controls,
PhotoEnhance™, or ICM, click the Advanced button after you select
the setting):
• Off (No Color Adjustment) disables color management in the
printer driver. Choose this mode when you use a color managed
workflow in Photoshop or other software. See page 151 for
instructions.
• Color Controls lets you specify individual values for adjusting
brightness, contrast, saturation, and CMY inks, or choose from
three Printer Color Adjustment modes. You can also choose from
two
Gamma settings, and use either a color circle or slide bar to
adjust color.
Tip: If you turn off color
management, you can
still control the ink
density, as described
on page 141.
To Next Page
Loading...
