62
62 | Handling Paper and Other Media
6. Press u to go back to REMAINING PPR SETUP.
7. Press d to select
ROLL PAPER LENGTH.
8. Press r, then select the length of the roll paper loaded in the printer,
from 15 to 300 ft (5 to 99.5 m), then press
OK.
9. Press l, then press d to select
ROLL LENGTH ALERT.
10. Press r, then select the length at which you want to receive an alert
message, from 3 to 50 ft (1 to 15 m), then press
OK.
11. Press to exit the menu.
Placing the Paper in the Printer
1. Open the roll paper cover.
Tip: You can use
Maintenance mode to
switch the units of
measurement in the
printer from meters to
feet. See page 172 for
instructions.
To Next Page
Loading...
