22
22 | Setting Up the Printer
For assembly, you need floor space of approximately:
• 8 × 8 feet (2.4 × 2.4 m) for the Epson Stylus Pro 7900 and stand
• 13 × 13 feet (4 × 4 m) for the Epson Stylus Pro 9900 and stand
Unpacking and Assembling the Stand
1. Lift the box up and away from the shipping pallet. Then remove the box
containing the stand and paper basket.
2. Unpack the stand and make sure you have all these items.
2 Sides
Manual holder
Horizontal strut
Hex wrench
6 Bolts
2 Wing screws with
lock washers
To Next Page
Loading...
