3
Printing and Printer Management
3-3
R4C5980
Rev. C
A5 size MANAG.FM
7/12/01 Pass 3
R
Proof Sign-off:
DAI A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
2. Make sure that the printer is on.
3. Press the Paper Source button repeatedly until the Roll Auto
Cut light or Roll Cutter Off light is on.
c
Caution:
If you are loading thick roll paper, select Roll Cutter Off.
Paper that is too thick may damage the paper cutter.
4. Make sure the Operate light or Pause light is not flashing, then
pull the paper set lever all the way up. The Paper Out light
turns on and LOAD PAPER appears on the LCD panel.
c
Caution:
Do not move the paper set lever up while the Operate light
or Pause light is flashing. Otherwise, damage may occur.
To Next Page
Loading...
