EasyManua.ls Logo

Epson Stylus Pro 9500 - Chapter 3 Printing and Printer Management; Loading Paper; Loading Roll Paper

Epson Stylus Pro 9500
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-2
Printing and Printer Management
R4C5980
Rev. C
A5 size MANAG.FM
7/12/01 Pass 3
L
Proof Sign-off:
DAI A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
Loading Paper
Loading roll paper
To load the roll paper, follow the steps below.
1. Open the roll paper cover. Make sure that the roll paper is
attached to the printer properly.
c
Caution:
Keep your fingers off the printable surface of the media, as
fingerprints may reduce printout quality. Whenever
possible, use gloves to load paper into the printer.
Note:
If two roll paper spindles are attached to the printer, keep the unused
roll wound up using the roll paper belt, to avoid paper jams. To
secure the roll paper, tap the end of the roll paper belt lightly on the
roll paper. To remove the roll paper belt from the roll paper, simply
take off the belt.

Table of Contents

Other manuals for Epson Stylus Pro 9500

Related product manuals