DO NOT INSTALL THE EPSON (OEM) INKS OR PAPER THAT WERE PROVIDED WITH THE PRINTER.
POWER LOSS MAY CAUSE CARTRIDGE CHIP FAILURE. USE AN UNINTERRUPTIBLE POWER SUPPLY (UPS)
TO AVOID ACCIDENTAL POWER LOSS.
REMOVE CARTRIDGE BEFORE POWERING PRINTER OFF. FAILURE TO REMOVE CARTRIDGE PRIOR TO
POWERING OFF MAY RESULT IN CHIP FAILURE.
CARTRIDGE CHIP DOES NOT INDICATE DEPLETION. REPLACE CARTRIDGE ONCE THE EPSON DISPLAY
SHOWS 1% INK REMAINING. SOME RESIDUAL INK WILL REMAIN IN CARTRIDGE BAG SO THAT BAG WILL
NOT COLLAPSE. RUNNING CARTRIDGES DRY CAN RESULT IN INK DELIVERY SYSTEM FAILURE.
SAWGRASS DOES NOT CONDONE THE USE OF CHIP RESETTERS. RESETTING THE CHIPS CAUSES THE
CARTRIDGE TO FAIL TO DELIVER THE INK AS EXPECTED, POTENTIALLY DAMAGING THE VACUUM PUMP
AND/OR OTHER COMPONENTS OF THE INK DELIVERY SYSTEM.
CAUTION
Epson Stylus Pro 7890/9890
WinProle
INsTAllATION GUIde
Windows XP, Vista and 7
v20130619
To Next Page
Need help?
General