Make sure there are no gaps between the roll paper holders and the media.
Lock roll paper holds by flipping down the tension lever.
Place media and roll paper holders onto the rightmost roll paper guide.
Slide left roll paper guide into the left roll paper holder.
Make sure there are no gaps between the roll paper holders and the guides.
Flip the lock to the left of the roll paper holder to secure paper.
Insert paper into slot and feed down. Paper should be hanging out of the bottom of the machine.
Press the button
Once it is done adjusting, check to make sure media settings on Epson match your media.
If you receive any error messages, check to make sure that there are no gaps between the media and
the roll paper holders and that there are no gaps between the roll paper holders and the guides.
LOADING| MEDIA| CONT.
To Next Page
Loading...
