98
98 | Maintaining and Transporting the Printer
Follow these steps to replace the tank:
1. Grasp the handle at the bottom of the tank (on the side of the printer)
and gently pull it out. Then place the tank in the plastic bag included
with the new one.
2. Place the used tank in the plastic bag included with the new tank and
dispose of it carefully.
3. Insert the new tank.
WARNING: If ink gets on
your hands, wash them
thoroughly with soap
and water. If ink gets in
your eyes, flush them
immediately with water.
Caution: Be careful not
to spill ink from the
maintenance tank when
removing it. Hold it upright
at all times and dispose of
it carefully.
To Next Page
Loading...
