Epson Stylus TX100 Series

1
2
3
Copyright © 2008 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX
No. Reg: 03/DJPDN/MG/III/2001
Tgl.13 Maret 2001
Press.
Tekan.
Connect and plug in.
Hubungkan dan colokkan.
A
Turn on.
Nyalakan.
B
Open.
Buka.
A
Shake.
Kocok.
B
Remove yellow tape.
Lepas pita kuning.
D
Install.
Pasang.
E
Close.
Tutup.
F
G
The ink cartridges rst installed in your printer will be partly used to charge the print head. These cartridges print fewer pages
compared to subsequent ink cartridges.
Kartrid tinta yang pertama dipasang pada printer Anda sebagian akan digunakan untuk mengisi kepala cetak. Kartrid ini akan
mencetak lebih sedikit halaman daripada cartridge tinta berikutnya.
Do not open the ink cartridge package until you are ready to install it in the
printer. The cartridge is vacuum packed to maintain its reliability.
Jangan buka kemasan kartrid tinta sampai Anda siap memasangnya pada
printer. Kartrid dikemas kedap udara untuk menjaga mutunya.
Contents may vary by location.
Isi tergantung lokasi.
Press (click).
Tekan (klik).
EN
Start Here
ID
Mulai di sini
Unpacking
Buka Kemasan
Remove all protective materials.
Lepas semua pelindung.
Turning On
Menyalakan
Installing the Ink
Cartridges
Memasang Kartrid
Tinta
Unpack.
Buka kemasan.
C
Wait approximately 2 mins.
Tunggu kurang lebih 2 mnt.
H

Epson Stylus TX100 Series Specifications

General

Max Print Resolution	5760 x 1440 dpi
Connectivity	USB 2.0
Print Technology	Inkjet
Scanner Type	Flatbed
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes
Paper Capacity	100 sheets (A4)
Ink Cartridges	Epson T0731 Black, Epson T0732 Cyan, Epson T0733 Magenta, Epson T0734 Yellow
Operating Systems	Windows XP/Vista, Mac OS X 10.4.11 or later

Summary

Installing Ink Cartridges

Cartridge Installation Steps

Detailed steps for unpacking and installing ink cartridges into the printer, including preparation and final closure.

Printer Unpacking and Preparation

Initial Unpacking and Material Removal

Instructions for unpacking the printer and removing all protective materials before setup.

Printer Power On Procedure

Connecting Power and Turning On

Steps to connect the printer to power and initiate the power-on sequence.

Software Installation

Installing Printer Software via USB

Guidance on installing printer software, including connecting the USB cable and initiating the installation.

Getting More Information

Accessing User Guides and Troubleshooting

Information on accessing user guides for copying, printing, scanning, and troubleshooting.

Safety Instructions

General Safety Precautions

Important safety warnings regarding power cords, ink handling, and product usage to prevent hazards.