Epson Stylus TX420W User Manual

Start Here
3 Squeeze the edge guide as you slide it all the way to
the left.
4 Load letter or A4-size paper against the right edge and
behind the tab, with the printable side face up.
5 Slide the edge guide over.
Continue with section 6 to choose your connection type.
Read these instructions before using your product.
1
Unpack
Power cord
USB cable
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1 Connect the power cable.
Caution: Do not connect to your computer yet.
2 Press the Encender (On) button.
3
Select language
The default language of the LCD menus is Spanish.
To select Spanish as your language, press Iniciar (Start).
To select English, press
or to select it, then press
Iniciar (Start).
Note: If you want to change the language, press or to
select it, then press
Iniciar (Start).
4
Install ink cartridges
Caution: Keep ink cartridges out of the reach of children and do not
drink the ink.
Note: The ink cartridges that come with your printer have a lower
yield due to the ink system charging process. This process is carried
out the first time you turn on your printer and guarantees better
performance.
1 Lift up the scanner, then open the cartridge cover.
2 Shake the ink cartridges gently 4 or 5 times, then
unpack them.
3 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals or the cartridges
may leak.
4 Insert the cartridges in the holder for each color.
5 Press each cartridge down until it clicks.
6 Close the cartridge cover. Press down until it clicks.
7 Lower the scanner.
8 Press the Iniciar (Start) button to charge the ink.
Priming takes about 2 minutes.
Caution: Don’t turn off the printer while it is priming or you’ll
waste ink.
5
Load paper
1 Open the paper support and pull up the extensions.
2 Open the output tray, pull out the extensions, and raise
the stopper.
Epson Stylus
®
TX420W
4118540 Rev.0
1-F C
4118540 Rev.0
1-F M
4118540 Rev.0
1-F Y
4118540 Rev.0
1-F K

Epson Stylus TX420W Specifications

General

Print Technology	Inkjet
Max Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Optical Scan Resolution	1200 x 2400 dpi
Connectivity	USB, Wi-Fi
Paper Capacity	120 sheets
Printer Type	All-in-One
Functions	Print, Scan, Copy
Wireless	Yes
Output Capacity	50 sheets
Dimensions (W x D x H)	450 x 342 x 182 mm
Print Speed (Black)	35 ppm
Print Speed (Color)	15 ppm
Paper Sizes	A4
Input Capacity	120 sheets
Copy Speed (Color)	15 cpm
Operating Systems	Windows, Mac

Summary

Unpack

Turn on

Select language

Install ink cartridges

Load paper

Choose your connection

Wireless Connection

Details for connecting your printer wirelessly to your network, including SSID and password requirements.

Direct USB Connection

Instructions for connecting your printer directly to your computer using a USB cable.

Install software

Control panel overview

Troubleshooting Common Issues

Network setup was unsuccessful

Steps to take if the printer's network setup fails during installation.

Need paper and ink

Genuine Epson Paper

Information about various Epson paper types for professional results.

Genuine Epson Inks

Guidance on selecting the correct Epson ink cartridges, including model numbers.

Accessing Support Resources

User's Guide

Instructions on how to access the on-screen User's Guide for detailed information.

Epson Technical Support

Information on how to get help via the Epson support website and contact numbers.