Epson STYLUS TX106 - 4.2 Disassembly Procedures

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119 Revision C
DISASSEMBLY/ASSEMBLY Disassembly Procedures 64
Confidential
4.2 Disassembly Procedures
For disassembling each unit, refer to the pages in the following flowchart.
Figure 4-1. Disassembling Flowchart
You need to remove the parts/units shown in dashed line box if they exist on
the way to the target part/unit.
“ 4.5.5 EJ Roller/ EJ
Frame Assy ” (p81)
“ 4.5.4 PF Encoder/
PF Scale ” (p81)
Start
“ 4.4.1 Panel Unit ” (p72)
“ 4.3.1 Paper Support
Tray ” (p65)
“ 4.3.3 Document Cover/
ASF Cover ” (p67)
“ 4.3.6 Middle Housing ”
(p71)
“ 4.5.3 Hopper ” (p80)
“ 4.4.2 Main Board ”
(p73)
“ 4.5.12 PF Roller ”
(p98)
“ 4.5.14 Waste Ink Pads ”
(p102)
“ 4.5.9 Main Frame ”
(p92)
“ 4.5.13 LD Roller/
ASF Unit ” (p99)
“ 4.5.6 CR Motor/
Driven Pulley ” (p83)
“ 4.5.7 Ink System ” (p85)
“ 4.5.1 Printhead ” (p76)
“ 4.5.11 CR Unit ” (p95)
“ 4.5.4 PF Encoder/
PF Scale ” (p81)
“ 4.5.5 EJ Roller/
EJ Frame Assy ”
(p81)
“ 4.5.1 Printhead ” (p76)
“ 4.3.4 Scanner Stand /
Cover Wire ” (p68)
“ 4.5.8 PF Motor ”
(p90)
“ 4.3.2 Stacker Assy/ Ink
Tube Cover ” (p65)
“ 4.3.5 Scanner Unit ” (p70)
“ 4.4.3 Power Supply
Unit ” (p74)
“ 4.5.2 CR Scale ” (p79)
“ 4.5.6 CR Motor/
Driven Pulley ” (p83)
“ 4.5.7 Ink System ” (p85)
“ 4.5.10 Upper Paper
Guide ” (p94)
“ 4.5.13 LD Roller/
ASF Unit ” (p99)
“ 4.6.2 Scanner Carriage
Unit ” (p105)
“ 4.6.1 Upper Scanner
Housing ” (p104)
“ 4.6.3 Scanner Motor
Unit ” (p107)
“ 4.3.3 Document Cover/
ASF Cover ” (p67)