8. Lower the control panel by squeezing the release bar and gently pushing the panel down.
Caution: Do not lower the control panel without first squeezing the release bar or you may damage
your product.
9. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product.
Keep the product level during transportation. Be sure to remove the tape from the ink cartridge holder
before turning on your product. If print quality has declined when you print again, clean and align the
print head.
Parent topic: Cleaning and Transporting Your Product
Related concepts
Print Head Cleaning
Print Head Alignment
173
To Next Page
Loading...
Need help?
General
