SE Group Confidential (Related Staff Only) Until: Permanent
16
Black
Cyan
1. Tighten Right Long Screw until the thickness(2.0mm) gauges can be moved smoothly
at 2 locations(Black and Cyan).
2. Tighten Left Long Screw as the same as the right one.
Adjust tank height – Rough Adjustment
Tighten to adjust
Right Long Screw
Left Long Screw
Tighten to adjust
3. Loosen 2 Blue screws a little bit at 2 locations
(Black and Cyan).
Tank
Tank
Tank
There is gap somehow.
loose
Tighten
Reason why to loose 2pcs screws
Loosen Blue screws Loosen Blue screws
To Next Page
Loading...
