SE Group Confidential (Related Staff Only) Until: Permanent
17
1. Tighten Right Long Screw until the thickness(2.0mm) gauges can be
moved smoothly, AGAIN
at 2 locations(Black and Cyan).
2. Tighten Left Long Screw as the same as the right one.
Adjust tank height – Detail Adjustment
Tighten to adjust
Right Long Screw
Left Long Screw
Tighten to adjust
3. Make sure the thickness gauge(2.5mm) can’t be passed at 2 locations
(Black and Cyan).
Can’t be Passed Can’t be Passed
Thickness
gauge(2.5mm)
To Next Page
Loading...
