22 Printing from Start to Finish
6. Select one of the following as the Mode setting:
■ Epson Standard (sRGB) increases the contrast in images.
■ Adobe RGB matches images colors to the Adobe RGB color standard.
Use this setting if your source file was captured in Adobe RGB.
■ Photo Enhance lets you choose from various Scene Correction settings
to automatically analyze your photos and, if necessary, adjusts the
brightness, contrast, and saturation.
■ ICM automatically adjusts colors based on the printer’s ICC profile and
the selected Media Type setting, using the Image Color Matching system.
■ Off (No Color Adjustment) disables color management in the printer
driver.
Note:
For color management instructions, see epson.com/proimaging/iccprofiles.html.
For more information about print settings, click Help or see your online User’s
Guide.
7. Choose the paper Source in which you loaded your paper:
■ Sheet: for sheets of paper loaded in the sheet feeder.
■ Roll Paper: for photos or panoramics up to 27 inches (68.6 cm) long. If
desired, click
Print page frame to print a cutting guideline around each
photo.
■ Roll Paper (Banner): for photos or banners over 27 inches (68.6 cm)
long. If desired, click
Save Roll Paper to reduce the amount of roll paper
between each banner.
■ Front - Fine Art: for a sheet of compatible paper loaded in the manual
feed tray.
■ Front - Poster Board: for thick media loaded in the manual feed tray.
■ CD/DVD: for a disc loaded in the CD/DVD tray.
8. Select the paper
Size setting for the paper you loaded.
If you loaded roll paper, create a custom paper size. Select
User Defined in
the Size menu, then click the
User Defined button. Type a name for your
custom size. For the Paper Width, enter
12.95 for Super B-size rolls. For the
Paper Height enter the desired length up to 129 inches. Click
Save, click OK,
then select your custom paper size in the
Size menu.
To Next Page
Loading...
