Item Setting/Additional Explanation
Print Job Priority
(except for the SC-P6500E Series/
SC-T3700E Series)
Same Roll, Queued Order
Displayed when the SSD Unit is installed.
When Same Roll is selected, priority is given to printing jobs that are
suitable for the roll paper being fed. This can shorten printing time by
reducing the number of roll paper changes.
When Queued Order is selected, jobs are printed in the order in which they
are received. Switch the roll paper according to the job you are printing.
Cut Settings
Auto Cut On, Off
Print Cutting Guideline On, Off
If Auto Cut is Off, you can choose to print (On) or not print (Off) cut lines
on roll paper. Cut lines are not printed if Auto Cut is On or when printing
cut sheets or poster board.
Wait for Cut Between Pages On, Off
Cut for Borderless Print Two Cuts, One Cut
Quick Cut On, Off
Cut Mode Normal, Quiet
Margin Refresh On, Off
Roll End Option Continue, Stop Printing, Reprint
Select whether to print the remaining data on the replaced roll (Continue),
to stop printing (Stop Printing), or print again from the beginning
(Reprint).
Reprint is only available when the SSD Unit is installed.
Take-up After Cut
(except for the SC-P6500E Series/
SC-T3700E Series)
On, Off
Error Notice
Paper Size Notice On, Off
Paper Type Notice On, Off
Detect Paper Skew On, Off
Platen Gap Offset Standard, Wide, Wider, Widest
Cut Sheet/Poster Board Slot Front, Back
Custom Paper Setting
01-30 Displays the registered number and registered media name.
Paper setting information that has been registered using the driver or
other software cannot be changed by the printer.
Change Name Displays the media name registration screen.
Change Reference Paper Displays the reference paper type.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Menu List
150
To Next Page
Loading...
