What to do if I cannot print with my Epson SureColor SC-S30600 Printer in the network environment?
If you're unable to print via a network with your Epson printer, consult your network administrator for the correct network settings. Alternatively, connect the printer directly to the computer with a USB cable and attempt to print. If printing works via USB, it indicates a problem with the network environment.
What to do if my Epson SureColor SC-S30600 sounds like it is printing, but nothing prints?
If your Epson printer sounds like it's printing but nothing is coming out, try these steps: 1. Select Head Alignment to realign the print head if the print results seem grainy or out of focus. 2. Perform Feed Adjustment according to the media used. 3. Print a test pattern. 4. Make sure you are using the correct ink cartridge. 5. Wait for a while without turning off the printer.
What to do if the test pattern does not print correctly on my Epson Printer?
If the test pattern on your Epson printer doesn't print correctly, replace the old ink cartridge with a new one. If that doesn't work, print a test pattern again after performing head cleaning. Also, consider steps to take when the printer has not been used for a long time.
Why is the printed surface from my Epson Printer scuffed or used?
If the printed surface is scuffed or appears used, consider these solutions: * Replace the ink cartridge with a new one. * Check media specifications to ensure compatibility with the printer. * If a wave has developed, press the d button in the control panel to feed the media and avoid the affected area. * Ensure the media is loaded correctly to prevent off-center or incomplete prints. * Avoid using creased or folded media, which can cause smudges. * Set Media Skew Check to On in the Menu. * Clean the affected area. * Choose On for Media Size Check in the setup menu. * Adjust the Platen Gap to suit the media.
Why is the media creased when using my Epson SureColor SC-S30600 Printer?
Media may crease or tear during printing if the printer options are not correctly adjusted for the media being used. Adjust the heater temperature to suit the media. You can also try selecting Off for Tension Measurement in the setup menus.
General| Maximum Print Width | 64 inches |
|---|---|
| Print Resolution | 1440 x 1440 dpi |
| Number of Colors | 4 |
| Connectivity | USB, Ethernet |
| Print Technology | Piezo inkjet |
| Ink Colors | Cyan, Magenta, Yellow, Black |
| Media Handling | Roll media |
| Operating Systems | Windows, Mac |
| Power Requirements | 220-240 V, 50/60 Hz |
| Printer Type | Large format |
| Printing Method | inkjet |
To Next Page
