Control panel
A
P button (power button)
Turns the power on and off.
B
P light (power light)
The printer's operational status is indicated by a lit or
flashing light.
On : The power is on.
Flashi
ng
: The printer is receiving data or performing
head cleaning or other operations during
shut-down.
Off : The power is off.
C
M button (media setup button)
Press this button to display the Media Setup menu,
which contains such items as Media Remaining,
Select Media, Customize Settings, and Print Media
List. This button is disabled during printing.
U “The Media Setup Menu” on page 74
D Display
Displays the printer's status, menus, error messages,
and so on. U “Understanding the Display” on
page 13
E Menu button
Press this button to display menus. U “Using the
Control Panel Menu” on page 69
F
y button (back button)
Press this button to exit to the previous menu when
options are displayed. U “Menu Operations” on
page 69
G
l/r buttons (left and right arrow buttons)
Use to position the cursor when performing such
tasks as entering a Setting Name or IP Address in
the setup menu.
H
u/d buttons (media feed buttons)
❏ When media is loaded, you can press the d to feed the
media and u to rewind. Keep the d button pressed to
feed the media up to 103 cm. Keep the u button
pressed to rewind the media up to 25 cm.
Note that when the u button is used to rewind, the
media will stop when its edge reaches the starting
print position. Rewind can be resumed by releasing
the button and then pressing it again.
❏ When the menus are displayed, these buttons can be
used to select menu items and options. U “Menu
Operations” on page 69
I
Z button
❏ Pressing this button when a menu item is highlighted
displays options for the selected item.
❏ Pressing this button when an option is highlighted
selects the highlighted item or performs the selected
operation.
J
button (heating and drying button)
Pressing this button displays the Heating & Drying
menu, where you can adjust the Heater
Temperature. If the optional additional print drying
system is attached, you can also adjust Additional
Dryer settings. These options can be adjusted during
printing.
U “The Media Setup Menu” on page 74
SC-S30600 Series User's Guide
Introduction
12
To Next Page
Loading...
