❏ Print Check Pattern
Print a check pattern to check for clogged nozzles.
Perform head cleaning if parts of the pattern are
faint or missing.
Print a Check Pattern U “Checking for clogged
nozzles” on page 51
Head Cleaning U “Head Cleaning” on page 52
Saving Optimal Settings
for the Current Media
(Print Media Settings)
A variety of media settings can be optimized for the
current media and stored in the printer.
Once frequently used settings have been stored in a
media setting bank, it can be recalled to instantly
optimize multiple parameters.
The printer offers a total of 30 media setting banks.
This section describes how to create media setting banks
and the settings that can be stored.
Parameters Stored in Media
Setting Banks
Media setting banks store the following:
❏ Setting Name
❏ Feed Adjustment
❏ Platen Gap
❏ Head Alignment
❏ Heating & Drying
❏ Media Suction
❏ Head Movement
❏ Multi-Strike Printing
❏ Roll Type
❏ Tension Measurement
❏ Media Tension
❏ Feed Speed
For more information on these items, see U “The
Media Setup Menu” on page 74.
Saving Settings
Follow the steps below to save media settings.
Buttons that are used in the following settings
Choosing a Media Setting Bank
A
After confirming that the printer is ready to
print, press the Menu button.
The settings menu will be displayed.
B
Select Media Setup and press the Z button.
C
Use the d/u buttons to select Customize
Settings and press the Z button.
D
Use the d/u buttons to select a media setting
bank number between 1 and 30 and then press
the Z button.
Note that any settings already saved to the printer
will be overwritten.
SC-S30600 Series User's Guide
Basic Operations
41
To Next Page
Loading...
