U Maintenance cover (right)
Open this cover when performing regular maintenance. Normally closed when using the printer.
U “Regular Maintenance” on page 53
V Media loading lever
After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media
prior to removal.
W Alert lamp
This lamp lights or flashes when an error occurs.
On/flashes : An error has occurred; the type of error is indicated by how the lamp lights or flashes. Check the
contents of the error on the control panel's screen.
Off : No error.
X Control panel
U “Control panel” on page 12
Y Front cover
Open when loading media, cleaning the inside of the printer, or removing jammed media. Normally closed when
using the printer.
Inside
Dirt on any of the following parts may reduce print quality. Regularly clean or exchange these parts as described in the
chapters listed in the reference sections below.
SC-S30600 Series User's Guide
Introduction
9
To Next Page
Loading...
