System Requirements
Consult the documentation for your software RIP.
Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration 360 nozzles × 2 rows × 4 colors
(black, cyan, magenta, yellow)
Resolution (maximum) 1440 × 1440 dpi
Control code ESC/P raster (undisclosed
command)
Media feed method Friction feed
Built-in memory 512 MB for Main
128 MB for Network
Interface Hi-Speed USB-Compatible with
the USB 2.0 Specification.
100BASE-TX/1000Base-T
*1
Rated voltage (#1, #2) AC 100 to 120V
AC 200 to 240V
Rated frequency (#1,
#2)
50 to 60Hz
Rated current (#1, #2) 10A (AC 100 to 120V)
5A (AC 200 to 240V)
Power consumption
(#1)
Printing: Approx. 200 W
Sleep mode: Approx. 10 W
Power off: 0.5 W or less
Power consumption
(#2)
Printing: Approx. 450 W
Sleep mode: 0.1 W or less
Power off: 0.1 W or less
Temperature Operating: 15 to 35 ˚C/59 to 95
˚F (20 to 32 ˚C/68 to 90 ˚F
recommended)
Storage:
-20 to 40˚C (-4 to 104
o
F) (within
a month at 40˚C (104
o
F))
Printer Specifications
Humidity Operating: 20 to 80% (40 to 60%
recommended) (without
condensation)
Storage: 5 to 85% (without
condensation)
Dimension Storage (minimum)
dimensions: 2620 (W) × 963 (D)
× 1311 (H) mm
Maximum dimensions: 2620
(W) × 1259 (D) × 1650 (H) mm
Weight
2
Approx. 219 kg
(without ink cartridges)
*1 Use a shielded twisted pair cable (category 5 or better).
*2 With standard roll media system.
Ink Specifications
Type Special ink cartridges
Pigment ink Black, Cyan, Magenta, Yellow
Use by date See the date printed on the
package (at normal temperature)
Print quality
guarantee expiry
Six months (from date package
containing ink cartridge is opened)
Storage
temperature
Uninstalled:
-20 to 40˚C (within a month at 40˚C)
Installed:
-10 to 40˚C (maximum four days at
40˚C)
Transporting:
-20 to 60˚C (within a month at 40˚C,
within 72 hours at 60˚C)
Cartridge
dimensions
700 ml:
(W) 40 x (D) 305 x (H) 110 mm
c
Important:
Do not refill the ink.
SC-S30600 Series User's Guide
Appendix
96
To Next Page
Loading...
