The Print Logs Menu
These items are used to track consumables.
Item Parameter Explanation
Print Job Log Sheet Print You can print the job information saved in the printer (up to 10
jobs). The information includes the media and ink used in each job,
making it easier to track the use of consumables.
Show Total Prints
XXXXXX m
2
(XXXXXX ft
2
)
Select Show Total Prints to view the total area of media printed (to
a maximum of six figures).
The Printer Status Menu
These items track printer use and settings.
Item Parameter Explanation
Print Status Sheet Print Print a status sheet showing current printer settings, and the
status of periodical replacement parts. Use this option to view a
variety of information about the printer on a single sheet and help
schedule the periodic replacement of parts.
myEpsonPrinter Status Not Started, Disabled,
Enabled
You can see if myEpsonPrinter is enabled or disabled. If it is
enabled, the last uploaded time is displayed. This function is not
supported in some areas and some countries.
Last_Uploaded:, (Not
Uploaded), MM/DD/YY
HH:MM GMT
Firmware Version XXXXXXX,X_XX,XXXX View the printer Firmware Version.
The Network Setup Menu
indicates default settings.
Item Parameter Explanation
IP Address Setting
Auto -
Choose whether IP addresses are obtained automatically (Auto)
or manually (Panel) using DHCP. If Panel is selected, enter an IP
address, subnet mask, and default gateway address. Contact your
system administrator for detailed information.
Panel IP: XXX.XXX.XXX.XXX
SM: XXX.XXX.XXX.XXX
DG: XXX.XXX.XXX.XXX
Bonjour
On
Choose whether Bonjour is used (On), or is not used (Off), in the
network interface.
Off
Print Status Sheet Print Use Print Status Sheet to print the current network status. Use this
information for a complete overview of network settings.
SC-S30600 Series User's Guide
Using the Control Panel Menu
82
To Next Page
Loading...
