Printer Parts
Front section
A Maintenance cover (left)
Open this cover to clean the area around the print head. Normally closed when using the printer.
U “Cleaning Around the Print Head” on page 55
B After heater
The heater can be used to rapidly dry ink after printing.
U “Heating & Drying” on page 43
C Roll core holder
Place the used roll core for media take-up on these holders. There are two holders: one on the left and one on the
right.
U “Media Loading and Take Up” on page 35
D Tensioner
The tensioner maintains tension to prevent the media sagging as it is taken up.
E Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two
locking screws: one on the left and one on the right.
SC-S30600 Series User's Guide
Introduction
7
To Next Page
Loading...
