B
Tou ch General Settings - Scan Settings - Scan
Options - Document Feed Adjustment.
The adjustment value settings screen appears.
The adjustment values are shown in %.
C
Either touch - or + to show the intended
adjustment values or touch the adjustment
entry area to enter the adjustment values using
the keypad screen.
Adjustment values are determined as shown
below.
Example) When the length of the original is 50
cm and the print result is 50.1 cm:
50/50.1×100-100= -0.1996, rounded at the
second decimal.
Adjustment value: -0.2
D
Tou ch OK.
Image Stitching Adjustment
As for the original ( ) shown in the figure below, if a
misalignment occurs in the scanned image, such as in
, do Image Stitching Adjustment using the
following procedure.
If the original has wrinkles or is an uneven
thicknesses, the parts where the images join together
may be misaligned even after performing Image
Stitching Adjustment.
The arrow in
indicates the feed direction of the
original.
A
Tou ch Settings on the Home screen.
B
Tou ch General Settings - Scan Settings - Scan
Options - Image Stitching Adjustment.
The adjustment value settings screen appears.
C
Either touch - or + to show the intended
adjustment values or touch the adjustment
entry area to enter the adjustment values using
the keypad screen.
Shifting the adjustment value by 1 will correct
the misalignment by about 0.1 mm in the actual
size.
When the Scan Results Are Shifted Up in
Relation to the Feed Direction of the Original
Set the adjustment value toward the plus sign.
When the Scan Results Are Shifted Down in
Relation to the Feed Direction of the Original
Set the adjustment value toward the minus sign.
D
Tou ch OK.
The Scanner Slot Has Come Off
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Problem Solver
212
To Next Page
Loading...
