Printer Specifications
Temperature
Operating 10 to 35˚C (15 to 25˚C is
recommended)
In storage (Before
unpacking)
-20 to 60 ˚C (Within 120 hours at
60˚C, within a month at 40˚C)
In storage (After
unpacking)
Ink charged: -10 to 40˚C (Within a
month at 40˚C)
Ink discharged:
*1
-20 to 25˚C
(Within a month at 25˚C)
Humidity
Operating 20 to 80% (40 to 60% is
recommended, without
condensation)
In storage 5 to 85% (without condensation)
Temperature and humidity range for operating (the range
shown by diagonal lines is recommended)
Dimensions (Width x Depth x Height)
Maximum dimen-
sions
*2
1848 x 829 x 975 mm
Storage 1848 x 499 x 975 mm
Weight
*3
Approx. 165 kg
*1 Use the Discharging/Charging Ink menu in the
Maintenance menu to discharge ink from the
printer.
U “If the Environment Indoors or During
Transportation Drops to -10 ˚C or Lower” on
page 236
*2 With the paper basket open
*3 Not including the ink supply unit
c
Important:
Use the printer at an altitude of 2000 m or less.
Interface Specifications
USB port for a com-
puter
USB 3.2 Gen 1 (Connector: B
Type)
USB Memory Port
USB Flash Memo-
ry
Hi-Speed USB (USB Flash Drive
with security settings cannot be
used.)
File system FAT, FAT32, exFAT
File format JPEG, TIFF, HP-GL, some PDFs
(See “Printing Files Directly from
a USB Flash Drive” on page 114
for details on printing PDFs.)
Ethernet
*1
Standards
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE 802.3az (supports
power-saving models)
(The connected device should
comply with IEEE802.3az
standards.)
Wi-Fi
Standards
SC-P8500DL/
SC-P8530DL/
SC-T7700DL/
SC-T7730DL
(except for Tai-
wan)
IEEE802.11b/g/n
Other than the
above
(including Tai-
wan)
IEEE802.11b/g/n/a/ac
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Appendix
244