Epson SureColor SC-P906 - Page 189

*1: The number of sheets that can be set varies depending on the paper thickness. The total thickness of the loaded paper
must not exceed 5mm.
*2: You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the
paper expanding or contracting. See the manual supplied with the paper and adjust settings as appropriate.
*3: The number of sheets that can be set varies depending on the paper thickness. The total thickness of the loaded paper
must not exceed 12mm.
*4: The max length you can set in printer driver is 18000 mm.
*5: There are no left and right borders.
*6: If feeding fails, load paper into the front paper feeder.
Commercially Available Paper for SC-P700 Series
Even if "✓" is attached to borderless printing availability, borderless printing may not be possible depending on the
Level selected in the printer driver.
c
Important:
❏ Although plain paper and recycled paper manufactured by other companies can be loaded and fed in the printer
as long as they meet the following specications, Epson cannot guarantee the print quality.
❏ Although other paper types manufactured by other companies can be loaded in the printer as long as they meet
the following specications, Epson cannot guarantee the paper feeding and print quality.
Name Size Capacity Thickness Source Borderless
Plain paper (cut sheets) US B (11x17 in.), A3+
50
*1
0.08 to
0.11mm (64
to 90g/m)
Rear paper
feeder
✓
*2
B4 -
A3
40
*1
✓
*2
Half Letter, Legal, B5, A5, A6
120
*3
-
Letter
✓
*2
A4
80
*3
✓
*2
Non-standard sizes
Width: 89 to 330.2 mm
Length: 127 to 1200 mm
*4
50
*1
-
Roll paper 210 mm (A4) to 330.2 mm
(13")
(Outer diameter: smaller than
84mm)
1 0.08 to 0.7
mm
Roll paper
unit
✓
*2, 5
Product Information > Paper Information > Available Paper and Capacities
189