Epson SureLab D800 Series User Manual

Code Message What to do
W-2201 Ink cartridge error
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Please install correct cartridge.
Epson recommends the genuine Epson cartridges listed above.
After deleting all of the print jobs,
chec
k the ink cartridge with the color
displayed in xxxx, and then replace the
cartridge.
If a message is displayed, check the
details.
See “Replacing Ink Cartridges” on
page 48
W-2202 Replace Cartridge
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Epson recommends the genuine Epson cartridges listed above.
After deleting all of the print jobs,
check the ink cartridge with the color
and model number displayed in xxxx,
and then replace the cartridge.
If a message is displayed, check the
details.
See
“Replacing Ink Cartridges” on
page 48
W-2203 Ink cartridge error
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Remove and reinstall them correctly or replace them.
Epson recommends the genuine Epson cartridges listed above.
After deleting all of the print jobs,
check the ink cartridge with the color
and model number displayed in xxxx,
and then replace the cartridge or
reinstall it correctly.
If
a message is displayed, check the
details.
See
“Replacing Ink Cartridges” on
page 48
W-2204 Ink cartridge error
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Please install correct cartridge.
Epson recommends the genuine Epson cartridges listed above.
After deleting all of the print jobs,
check the ink cartridge with the color
and model number displayed in xxxx,
and then replace the cartridge.
If a message is displayed, check the
details.
See
“Replacing Ink Cartridges” on
page 48
W-2205 Insufficient ink left to perform head cleaning or initial charge.
Replace the ink cartridge indicated by the ink light that is turned
on.
Delete all print jobs remaining in the operating system's print
queue.
The cartridge being used can be installed again for printing.
Replace the ink cartridge for which the
ink light is on, and then delete all print
jobs.
If a message is displayed, check the
details.
See
“Replacing Ink Cartridges” on
page 48
W-2403 Maintenance cartridge cannot be recognized
Delete all print jobs remaining in the operating system's print
queue.
Install the maintenance cartridge correctly.
After deleting all of the print jobs,
replace the maintenance cartridge or
reinstall it correctly.
If a message is displayed, check the
details.
See “Replacing the Maintenance
Tank” on page 56
Troubleshooting
80

Epson SureLab D800 Series Specifications

General

Brand	Epson
Model	SureLab D800 Series
Category	Printer
Language	English