Epson T048120 - User Manual

EPSON
PIS # T048120 Version 3.54 (USA)
Page 1 of 4 Release Date 04/2010
Product Information Sheet
1. Article and Corporate Identification
Product: Epson Ink Cartridge T048120
for use with Epson Stylus Photo R200, R220, R300, R300M,
R320, R340, RX500, RX600 and RX620 Printers
Manufacturer/Distributor: Epson America, Inc.
3840 Kilroy Airport Way
Long Beach, CA 90806
United States
TEL: 562-276-1369
FAX: 562-997-5799
The EPSON T048120 Ink Cartridge
Epson Quick-Dry ink is engineered to
provide superior results.
2. Composition Information
This is an aqueous ink formulation
Ink Composition CAS No. % By Weight
Proprietary dyes and pigments - < 7 %
Proprietary organic materials - 15 –20 %
Glycerols - 5 – 10%
Water 7732-18-5 balance
3. Hazard Identification
3.1 Emergency Overview: Ink component is a light black liquid that may cause eye irritation. Avoid contact with eyes
or clothing. In the case of skin contact, wash with soap and water. Keep out of reach of
children.
3.2 Potential Health Effects:
Eyes: Ink contact with eye may be mildly irritating. See Section 11 for Toxicology.
Skin: Ink contact with skin may cause irritation, swelling, or redness. It is not expected to cause an allergic
skin reaction. See Section 11 for Toxicology.
Inhalation: Intentional exposure to ink vapors may cause respiratory irritation. See Section 11 for Toxicology.
Ingestion: May cause upset stomach. See Section 11 for Toxicology.

Summary

Article and Corporate Identification

Product

Identifies the Epson Ink Cartridge T048120 and compatible printer models.

First Aid Measures

Eyes

Instructions for flushing eyes with water and seeking medical attention if irritation persists.

Skin

Washing with soap and water, and consulting a physician for persistent irritation.

Inhalation

Moving to fresh air and consulting a physician if necessary.

Ingestion

Seeking medical advice for persistent stomach upset.

Fire Fighting Measures

Flammability

Specifies flash point is greater than 230 deg. F / 110 deg. C.

Extinguishing Media

Exposure Controls and Personal Protection

Physical and Chemical Properties of Ink Formulation

Stability and Reactivity

Stability

Indicates the ink is stable.

Hazardous polymerization

Hazardous decomposition products

Incompatible materials

Toxicology and Health Hazards

Routes Of Overexposure

Lists eye, skin, inhalation, and oral routes of overexposure.

Acute Health Hazards

Describes potential irritation to eyes, skin, respiratory tract, and upset stomach from ingestion.

Toxicity Data

Regulatory Considerations

In U.S., NFPA;HMIS Hazard Rating

Overview

1. Function Description
2. Important Technical Specifications
3. Ink Composition (by weight)
4. Physical and Chemical Properties
5. Stability and Reactivity
6. Toxicology and Health Hazards
7. Ecological Information
8. Transportation Information
9. Regulatory Considerations
10. Usage Features
11. Emergency Overview
12. First Aid Measures
13. Accidental Release Measures
14. Precautions for Safe Handling and Use
15. Disposal Considerations
16. Maintenance Features

This document is a Product Information Sheet (PIS) for the Epson Ink Cartridge T048120, an aqueous ink formulation designed for use with various Epson Stylus Photo printers. These include the R200, R220, R300, R300M, R320, R340, RX500, RX600, and RX620 models. The ink is described as "Epson Quick-Dry ink" engineered to provide superior results.

Function Description:

The primary function of the Epson Ink Cartridge T048120 is to provide black ink for printing with compatible Epson Stylus Photo printers. It is an aqueous formulation, meaning it is water-based, and contains proprietary dyes and pigments, proprietary organic materials, glycerols, and water. The ink is designed to be quick-drying, contributing to the quality of printed output.

Important Technical Specifications:

Ink Composition (by weight):

• Proprietary dyes and pigments: < 7%
• Proprietary organic materials: 15-20%
• Glycerols: 5-10%
• Water (CAS No. 7732-18-5): Balance

Physical and Chemical Properties:

• Appearance: Black Liquid
• Odor: None
• pH: 9-10
• Boiling point: Approximately 212°F / 100°C
• Freezing point: Less than 32°F / 0°C
• Melting point: Less than 32°F / 0°C
• Flash point: Greater than 230°F / 110°C (closed cup, ASTM D3278)
• Autoflammability: None
• Explosive properties: None
• Oxidizing properties: None
• Vapor density: Greater than 1 (air = 1)
• Relative density: 1.07 at 68°F / 20°C
• Solubility in water: Complete
• Solubility in fat: No data available
• Partition coefficient: No data available
• Viscosity: Less than 5 mPa-s

Stability and Reactivity:

• Stability: Stable
• Hazardous polymerization: Will not occur
• Hazardous decomposition products: None
• Incompatible materials: Oxidizers and explosives

Toxicology and Health Hazards:

• Routes of Overexposure: Eye, skin, inhalation, and oral
• Acute Health Hazards:
  • Eye contact: May be mildly irritating.
  • Skin contact: May cause irritation and in some people swelling and redness; not expected to cause an allergic skin reaction.
  • Inhalation: Intentional overexposure to ink vapors may result in respiratory tract irritation.
  • Ingestion: May cause upset stomach.
• Chronic Health Hazards: None known
• Carcinogenicity: None known
• Toxicity Data:
  • Oral LD50: > 5000mg/kg (Rats)
  • Dermal LD50: > 2000mg/kg (Rats)
  • Inhalant LC50: Not Applicable
  • OSHA Regulated?: Not Established
• NFPA/HMIS Hazard Rating (in U.S.): Health (1), Flammability (1), Instability/Reactivity (0), Other (0)

Ecological Information:

• No data available on the adverse effects of this material on the environment.

Transportation Information:

• Not regulated as a Hazardous Material by DOT, IMO, or IATA.
• Does not require a TSCA Section 12(b) Export Notification.

Regulatory Considerations:

• U.S. DOT Hazard Class Regulated?: NO
• U.S. OSHA Inhalation Hazard?: NO

Usage Features:

Emergency Overview:

• Ink is a light black liquid that may cause eye irritation.
• Avoid contact with eyes or clothing.
• In case of skin contact, wash with soap and water.
• Keep out of reach of children.

First Aid Measures:

• Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical attention if irritation continues.
• Skin: Wash surface areas with soap and water. Wash soiled clothing before re-wearing. Consult a physician if irritation continues.
• Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary.
• Ingestion: Seek medical advice and attention if stomach continues to be upset.

Accidental Release Measures:

• If a spill occurs, use sponges to wipe up ink, then rinse the area with a damp cloth.
• Place waste in a closed container for disposal.
• Use proper ventilation.
• Do not dispose of waste to the sewer.
• No eye or skin protection is required during clean-up.
• Wash hands with soap and water.

Precautions for Safe Handling and Use:

• Keep out of reach of children and do not drink ink.
• Do not store the cartridge in high or freezing temperatures.
• Keep cartridge out of direct sunlight.
• Do not dismantle the cartridge.
• Do not store cartridges with oxidizing agents or explosives.
• Make sure the cartridge is dry before insertion into the printer housing.

Disposal Considerations:

• Used and unused cartridges are not a federal RCRA hazardous waste.
• Disposal should be in accordance with federal, state, and local requirements.

Maintenance Features:

The document does not explicitly detail maintenance features for the ink cartridge itself, as it is a consumable product. However, the precautions for safe handling and storage contribute to maintaining the product's integrity before use. The instructions for accidental release clean-up also touch upon post-use handling. The product is designed to be used as intended within compatible Epson printers, and its "Quick-Dry" nature is a performance feature rather than a maintenance one.

Epson T048120 Specifications