Epson T060120 - User Manual

Need help?

Do you have a question about the Epson T060120 and is the answer not in the manual?

Summary

Article and Corporate Identification

Product Information

Details about the Epson Ink Cartridge T060120 and compatible printers.

Hazard Identification

Emergency Overview

General warning about ink properties and immediate safety advice.

Potential Health Effects

Summarizes mild irritation risks for eyes, skin, inhalation, and ingestion.

First Aid Measures

Eye Contact First Aid

Instructions for flushing eyes and seeking medical attention.

Skin Contact First Aid

Guidance on washing skin and soiled clothing.

Inhalation First Aid

Recommendation to move to fresh air and consult a physician.

Ingestion First Aid

Advice to seek medical attention for persistent stomach upset.

Fire Fighting Measures

Extinguishing Media

Lists appropriate agents for extinguishing fires.

Fire Fighting Instructions

Provides guidance on fire suppression procedures and hazards.

Precautions for Safe Handling and Use

Exposure Controls and Personal Protection

Engineering Controls

States requirements for engineering controls.

Personal Protection

Specifies personal protective equipment requirements.

Physical and Chemical Properties of Ink Formulation

Toxicology and Health Hazards

Routes Of Overexposure

Identifies potential ways the body can be exposed to the ink.

Acute Health Hazards

Describes immediate health effects from overexposure.

Toxicity Data

Presents LD50 and LC50 values for toxicity assessment.

The EPSON T060120 Ink Cartridge is an aqueous ink formulation designed for use with a range of Epson Stylus printers, including the C68, C88, C88+, CX3800, CX3810, CX4200, CX4800, CX5800F, and CX7800 models. This product information sheet provides comprehensive details regarding its composition, potential hazards, safe handling, and other regulatory considerations.

Function Description:

The primary function of the EPSON T060120 Ink Cartridge is to provide black ink for printing. As an aqueous ink formulation, it is designed to deliver consistent print quality and performance within the specified Epson Stylus printer models. The ink is a light black liquid, indicating its intended use for standard black printing tasks.

Important Technical Specifications:

Composition: The ink formulation primarily consists of water (balance), with Carbon Black (<5%), proprietary dyes and pigments (<2%), proprietary organic materials (10-15%), and glycerols (10-15%).
- CAS Numbers: Carbon Black (1333-86-4), Water (7732-18-5).
Physical and Chemical Properties:
- Appearance: Black Liquid
- Odor: None
- pH: 9.0 – 10.0, indicating it is alkaline.
- Boiling Point: Approximately 212°F (100°C).
- Freezing Point: Less than 32°F (0°C).
- Melting Point: Less than 32°F (0°C).
- Flash Point: Greater than 230°F (110°C) (closed cup, ASTM D3278), classifying it as non-flammable under normal conditions.
- Autoflammability: None
- Explosive Properties: None
- Oxidizing Properties: None
- Vapor Density: Greater than 1 (air = 1).
- Relative Density: 1.07 at 68°F (20°C).
- Solubility in Water: Complete.
- Solubility in Fat: No data available.
- Partition Coefficient: No data available.
- Viscosity: Less than 5 mPa-s.
Stability and Reactivity:
- Stability: Stable.
- Hazardous Polymerization: Will not occur.
- Hazardous Decomposition Products: None.
- Incompatible Materials: Oxidizers and explosives.
Toxicology Data:
- Oral LD50: > 5000 mg/kg (Rats), indicating low acute oral toxicity.
- Dermal LD50: > 2000 mg/kg (Rats), indicating low acute dermal toxicity.
- Inhalant LC50: Not Applicable.
- OSHA Regulated: Not Established.
Regulatory Considerations (U.S.):
- DOT Hazard Class Regulated: NO.
- OSHA Inhalation Hazard: NO.
- NFPA/HMIS Hazard Rating: Health (1), Flammability (1), Instability/Reactivity (0), Other (0). These ratings indicate minimal health, flammability, and reactivity hazards.

Usage Features:

Compatibility: Specifically designed for Epson Stylus C68, C88, C88+, CX3800, CX3810, CX4200, CX4800, CX5800F, and CX7800 printers. Using this cartridge with incompatible printers may lead to suboptimal performance or damage.
Handling Precautions:
- Keep out of reach of children.
- Do not drink the ink.
- Avoid storing the cartridge in high or freezing temperatures.
- Protect from direct sunlight.
- Do not dismantle the cartridge.
- Do not store with oxidizing agents or explosives.
- Ensure the cartridge is dry before insertion into the printer housing to prevent electrical issues or damage.
First Aid Measures (in case of exposure):
- Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical attention if irritation persists.
- Skin: Wash affected areas with soap and water. Wash soiled clothing before re-wearing. Seek medical attention if irritation persists.
- Inhalation: Remove the subject to fresh air. Consult a physician if necessary.
- Ingestion: Seek medical attention if stomach upset continues.
Accidental Release Measures: In case of a spill, use sponges to wipe up the ink, then rinse the area with a damp cloth. Place waste in a closed container for disposal. Proper ventilation is recommended. No eye or skin protection is required during cleanup, but washing hands with soap and water afterward is advised. Do not dispose of waste to the sewer.

Maintenance Features:

Storage: Proper storage conditions are crucial for maintaining ink quality and cartridge integrity. Avoid extreme temperatures (high or freezing) and direct sunlight.
Disposal: Used and unused cartridges are not classified as federal RCRA hazardous waste. Disposal should be carried out in accordance with federal, state, and local requirements. This indicates that the cartridges can typically be disposed of through regular waste streams or recycling programs, depending on local regulations.
No Special Maintenance: The ink cartridge itself does not require specific user maintenance beyond proper storage and handling. The design is intended for straightforward installation and replacement.

The EPSON T060120 Ink Cartridge is a stable product with low hazard potential under normal use. Its formulation is designed for safety and environmental compatibility, as reflected in its non-flammable nature, low toxicity, and non-hazardous waste classification. Users are advised to follow the handling precautions to ensure safe and effective use.