Epson T88IV - TM Two-color Thermal Line Printer User Manual

6 TM-T88IV User’s Manual
English
4. Turn the knob until you see a triangle in the opening. This returns the cutter
blade to the normal position. There is a label near the cutter to assist you. See
illustration K.
5. Close the cutter cover.
6. Open the printer cover and remove the jammed paper.
Cleaning the Thermal Head
CAUTION:
After printing, the thermal head can be very hot. Be careful not to touch it and
to let it cool before you clean it. Do not damage the thermal head by touching
it with your fingers or any hard object.
Turn off the printer, open the printer cover, and clean the thermal elements of the
thermal head with a cotton swab moistened with an alcohol solvent (ethanol,
methanol, or IPA).
Epson recommends cleaning the thermal head periodically (generally every
3 months) to maintain receipt print quality.

Epson T88IV - TM Two-color Thermal Line Printer Specifications

General

Print Method	Thermal line printing
Print Resolution	180 dpi
Weight	Approx. 1.8 kg
Paper Width	79.5 ± 0.5 mm, 57.5 ± 0.5 mm
Interfaces	USB, Serial, Parallel
Two-Color Printing	Yes
Paper Thickness	0.06 to 0.085 mm
Dimensions	145 x 148 mm
Operating Temperature	5°C to 45°C
Storage Temperature	50°C
Operating Humidity	10% to 90% RH
Storage Humidity	10% to 90% RH