EasyManuals Logo

Epson TM-m30II User Manual

Epson TM-m30II
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
107
Appendix
Socket communication
For Ethernet interface
Communication specifications
10BASE-T/100BASE-TX
For Wi-Fi Interface
Specification
IEEE802.11b/g/n (2.4 GHz band) or IEEE802.11a/b/g/n/ac (2.4 GHz or 5 GHz band) compliant Wi-Fi
communication compatible.
Infrastructure mode is supported.
Support the IP address automatic acquisition function (DHCP, APIPA).
Communication Standard
IEEE802.11b (2.4 GHz)
IEEE802.11g (2.4 GHz)
IEEE802.11n (2.4 GHz)
IEEE802.11a (5 GHz)
IEEE802.11n (5 GHz)
IEEE802.11ac (5 GHz)
Security
Security can be selected from among the following:
WPA-PSK(AES)
WPA2-Personal
WPA2-Enterprise
Initial settings
These settings apply when the printer is initialized in the Interface Setup mode.
Port type TCP communication port for direct
printing
Port number 9100
Port communication direction bidirectional
Max. simultaneous connections 6
Number of connections for which printing is available 1 (occupied until the connection is
released.)
Time out: 90 seconds (changeable)
Countries where Wi-Fi can be used are limited. Since notes are provided for each country, check the
sheet supplied with the product.
When using wireless LAN, make sure you disconnect the LAN cable. If a LAN cable is connected,
wireless LAN is disabled.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM-m30II and is the answer not in the manual?

Epson TM-m30II Specifications

General IconGeneral
TypePOS printer
Character setsANK
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Maximum roll diameter83 mm
Supported paper width58 mm - 80 mm (Breite) mm
Maximum printing width80 mm
Power plug typeType G
Power source typeAC
USB portYes
USB connectorUSB Type-A / USB Type-B
USB 2.0 ports quantity2
Connectivity technologyWired
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Wi-FiNo
Internal memory- MB
Built-in barcodes-
Country of originPhilippines
Mounting positionHorizontal/Vertical
Autocutter durability1.5 million cuts
Built-in sensors detailsPaper End Sensor, Papier-Sensor
Sound pressure level (printing)55 dB
Mean time between failures (MTBF)360000 h
Product colorWhite
Print head life150.000.000 Impulse
Mean cycles between failures (MCBF)65000000
Pre-installed softwareTMNet WebConfig, ePOS-Device, ePOS-Display, ePOS-Print
Package depth240 mm
Package width200 mm
Package weight2150 g
Quantity per pack1 pc(s)
Quantity per pallet128 pc(s)
Quantity per pallet (UK)192 pc(s)
Master (outer) case width400 mm
Master (outer) case height255 mm
Master (outer) case length490 mm
Master (outer) case weight0 g
Harmonized System (HS) code84433210
Quantity per master (outer) case4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Width127 mm

Related product manuals