6 TM-P60 with Peeler User’s Manual
English
Notes on Use
Be sure to use the power switch to turn the printer on and off.
Do not unplug or plug in the AC adapter during printing.
Be sure not to open the roll paper cover when the printer is operating.
Protect the printer from impact.
Do not apply excessive force to the printer case.
Do not place food or beverages such as coffee on the case of the printer.
Notes on Installation
Be sure that the printer is installed horizontally when you install it on a table.
Be sure that the roll paper side is on the bottom when you install the printer
vertically.
Notes on the Rechargeable Battery
Before using the printer for the first time, charge the battery. The safety
precautions for the rechargeable battery are described previously in this manual.
For more details, see the battery instructions that came with the printer.
Notes on AC Adapter
Use the specified AC adapter (EPSON PS-10, Model: DA-42Y12) only.
Power Supply Cable Requirements
For US and Canada:
UL and CSA Approved;
Plug: AC125V, 7A or more, NEMA 5-15P,
Cable: 6 to 10 feet long, 3*AWG 18, SPT-2 or heavier,
Connector: AC125V, 7A or more.
For Europe:
EN Standard Approved;
Plug: AC250V, 10A or 16A Approved,
Cable: H03 or H05 (227IEC52, or 53), 3G 0.75mm² or more,
Connector: EN60320-1 approved AC250V 10A.
For UK:
BS Approved Type;
Plug: BS1363 Approved AC250V 10A or More Plug,
Cable: H03 or H05 (227IEC52, or 53), 3G 0.75mm² or more,
Connector: BS EN60320-1 Approved AC250V 10A.
Part Names
See illustration A.
To Next Page
Loading...
Need help?
General