TM-P60 with Peeler User’s Manual 7
English
Unpacking
The following items are included for the standard specification printer. If any item
is damaged, contact your dealer.
Printer
Roll paper
Battery pack (LIP-2500) and its User’s Manual
AC adapter (PS-10)
User’s Manual (this manual)
Control Panel (LEDs and Switches)
See illustration B.
Buttons
POWER
Press the button to turn the power on or off. To turn off the power, you need to
hold the button for more than 2 seconds.
FEED
Press the button to feed paper.
POWER LED Meaning
On Power is on.
Off Power is off.
Flashing The printer is in power-off operation or is in an area where wireless communication
is not possible.
Printer Condition ERROR LED Meaning
Power On On Printer is offline (paper out, power-on initialization, roll paper cover
open, power-off operation, or when the battery is used to supply
the power, the remaining battery charge is not enough for printer
operation).
Off Printer is online.
Flashing The temperature of the printer is too high. The printer resumes
printing automatically when the temperature returns to normal.
Power Off, battery
installed, and AC
adapter connected
On Indicates that an abnormality occurred during battery charging.
The battery must be replaced with a new one.
Off Battery is being charged. (BATT. [battery] LED is on.)
Printer Condition BATT. LED Meaning
Power On and
battery installed
On Remaining battery charge is not enough. It must be fully charged.
Off Remaining battery charge is adequate.
Flashing Remaining battery charge is below half.
Power Off and
battery installed
On The battery is being charged.
Off The battery is fully charged.
To Next Page
Loading...
Need help?
General