Epson TM-T20IIIL

30
Chapter 3 Advanced Usage
Line feed reduction rate
• Disabled (default setting)
• 25%
• 50%
• 75%
Barcode height reduction rate
• Disabled (default setting)
• 25%
• 50%
• 75%
Amount of reduction in character height
• Disabled (default setting)
• Extra character space reduction by 25%
• Extra character space reduction by 50%
• Extra character space reduction by 75%
Character code table defaults
Selectable from 43 pages including user-defined page
Default setting: PC437: USA, Standard Europe
International character defaults
Selectable from 18 sets
Default setting: USA
Column emulation mode
• 48 column mode (default setting)
• 42 column mode
Autocutting after closing the roll paper cover
• Cuts (default setting)
• Does not cut
• Paper reduction is not performed for space dot lines of graphics printing data.
• When reducing barcode height, reading of the barcode is not guaranteed. Be sure to check that
the barcode can be read with a user’s barcode reader in advance.