Epson TM T88V Manual

3
Notes on Usage
Timing of cutting off connection
If data transfer from an application of the host has already been completed, data might
remain in the printer internal buffer. As such data remaining in the buffer might be lost
when the connection is cut off, use the status and similar functions to check that transmitted
data has been completely printed when printing or cutting off the wireless connection.
Setting the Printer
When using this printer, setting ON the DIP switch 2-8.
Notes on Using with iOS-equipped Devices
Note the following points when using this product with iOS-equipped devices.
Depending on the iOS specifications, print data may be deleted if it is sent while the printer
is not ready to print.
The printer is unable to print in cases such as
• when the roll paper cover is open.
• when the paper is out.
Communication Specifications
❏ Conforms to Bluetooth Specification Version 2.1+EDR
❏ Equipped with the Serial Port Profile (SPP)
❏ Equipped with the iAP protocol
❏ Bluetooth Power Class 2 model
❏ Built-in antenna
Part Names of the Interface board
Push button
The Push button has the following functions.
❏ Status Sheet Printing
1. Turn on the printer, wait for about 7 seconds.
2. Keep pressing the Push button on the interface board for more than 3 seconds.The
printer starts printing the settings for the interface board and the information of
software version.
You can check all the information required for the Bluetooth connection (BD_ADDR,
PassKey, DeviceName) by this status sheet.
❏ Initialize wireless communication settings
1. Turn off the printer.
2. While pressing the Push button on the interface board, turn on the printer. (Keep
pressing the button until the printer starts printing wireless communication
setting sheet.)
Push button
USB port for Printer Setting
Check operation LED

Epson TM T88V Specifications

General

Dimensions (WxDxH)	145 x 195 x 148 mm
USB port	Yes
Standard interfaces	RS-232, USB 2.0
Serial interface type	RS-232
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Type	POS printer
Print speed	11.8 ips
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Safety	UL1950/CSA C22.2 No. 950
Certification	FCC/ICES-003
Built-in barcodes	2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF-14, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	360000 h
Product color	Black
Maximum roll diameter	83 mm
Supported paper width	80, 58 mm
Printing media thickness	55 - 80 µm
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN	No
Input current	1.8 A
Power supply type	DC
Pallet width	800 mm
Pallet height	2550 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	128 pc(s)
Quantity per pallet (UK)	192 pc(s)
Master (outer) case width	400 mm
Quantity per pallet layer	16 pc(s)
Master (outer) case height	255 mm
Master (outer) case length	490 mm
Quantity per pallet layer (UK)	24 pc(s)
Quantity per master (outer) case	4 pc(s)
Package depth	257 mm
Package width	193 mm
Package height	241 mm
Package weight	2660 g
Quantity per pack	1 pc(s)