Epson UB-E03 - User Manual

1
User’s Manual
© Seiko Epson Corporation 2014. All rights reserved.
Printed in Indonesia
Introduction
The UB-E03, designed for EPSON
®
TM printers, is a 10BASE-T/100BASE-TX
Ethernet interface board.
This manual provides instructions, including a simple setup for operators of
POS systems in which the UB-E03 is installed so that the operators can use the
UB-E03 safely and correctly.
Key to Symbols
The symbols in this manual are identified by their level of importance, as
defined below. Read the following carefully before handling the product.
CAUTION:
Cautions must be observed to avoid minor injury to yourself, damage to
your equipment, or loss of data.
Note:
Notes have important information and useful tips on the operation of your equipment.
Caution Label
The caution label on the product indicates the following precaution.
CAUTION:
Do not connect a telephone line, a display module cable, or a drawer
kick-out cable to the UB-E03’s 10BASE-T/100BASE-TX Ethernet connector.
Features and Functions
❏ Protocols: TCP, UDP, ICMP, IP, LP/LPR, TCP socket port
❏ Communication standard: 10Base-T/100Base-TX, Full duplex/half
duplex

Epson UB-E03 Specifications

General

Product Name	Epson UB-E03
Category	Control Unit
Connectivity Technology	Wired
Data Transfer Rate	10/100 Mbps
Form Factor	External
Data Link Protocol	Ethernet
Interface Type	Ethernet
Compatibility	Epson printers
Cable Length	1.5 m

Summary

Introduction and Key Information

Key to Symbols

Defines symbols used in the manual to indicate importance levels for product handling.

Caution Label Information

Explains precautions indicated by the caution label on the product regarding connector usage.

Part Names and Switches

Part Names Overview

Identifies the physical components of the UB-E03 interface board.

Switch Settings

Details DIP switch settings required on the TM printer for the interface board.

Connecting the Cables

Cable Connection Procedure

Step-by-step guide for connecting the Ethernet cable and power supply.

Important Connection Precautions

Warns against connecting incorrect cables to the Ethernet connector.

UB-E03 Setup and Configuration

Printing Status Sheet

Instructions on how to print the UB-E03 parameters for network configuration.

Network Connection Setup

Guidance on matching PC network settings to the printer's confirmed settings.

Resetting to Factory Defaults

Procedure to reset the UB-E03 to its original factory default settings.

Setup via Web Browser

Steps for configuring the UB-E03 using a web browser and IP address.

Standards and Approvals

Downloadable Resources

URLs for downloading the UB-E03 Technical Reference Guide and TMNet Win Config.

EMC Compliance Information

Details on EMC standards and warnings for Class A products in different regions.

FCC Compliance Statement

FCC rules compliance for Class A digital devices in commercial environments.

Canadian Compliance Statement

Applies Canadian ICES-003 regulations for Class A digital apparatus.

Outdoor Cable Connection Warning

Caution regarding connecting outdoor LAN cables and surge protection.